Update your trivum multiroom system

Michael Prinzler
Created on: 7/28/16 – Last changed on: 2/1/17

The easiest way to get your trivum system up to date is an software update via the trivum ServerAdmin Tool.

Before you perform a software update via the trivum ServerAdmin Tool, check the following:

  • Make sure that the trivum device is turned on
    Check if the indicator (LED) lights up on your device. 
  • Make sure that your trivum device is connected to the network
    Check the status LEDs on the network jack. Your device is connected to the network when one LED (Link OK) is permanently on and the other LED (Data OK) flashes.
  • Make sure that you use the latest version of the trivum ServerAdmin Tool
    Please download here the latest version of the trivum ServerAdmin Tool.
  • Make sure that you use Version 8.75 on your trivum Musicserver.
    Please update your trivum Musicserver to version 8.75 first, before your proceed the update to MusicCenter V9.
  • Make sure that all connected TouchPads are using version 2.13 or higher.
    Please update all connected TouchPads to version 2.13 or higher, before you proceed the update to MusicCenter V9.

To perform a software update via the trivum ServerAdmin Tool, proceed as follows:

  1. Start the trivum ServerAdmin Tool
  2. Click on File → Setup Channels
  3. Enter the following data for an update to the latest MusicCente V9 (beta) software:
    Main Version: 9, Sub Version: beta
  4. Confirm with OK
     → The list of available trivum devices updates itself. In column Available appears V9
  5. Right-Click on your trivum device, you wish to update
  6. Select Start softwareupdate

→ After download the update data, the trivum system reboots and installs the software update automatically. This may take a moment.


trivum technologies GmbH · Eierstr. 48 · 70199 Stuttgart